CMD HD and SCSI cable

[MIRKOSOFT]

Hi!


I found solution with A500 PSU 4,5V to power supply CMD HD (waiting...)


Now I want to connect HDD and CDRW to SCSI cable.


My SCSI cable has HD68pin ports (4 with terminator), HDD has HD68 connector and CDRW has IDC50 connector.


I bought two SCSI adapters IDC50 to HD68 and now want to connect it.


I connected first adapter to CMD HD mainboard and second adapter to CDRW-


NOW:


Which port and where have to be terminator on the cable?


Has it any order like IDE cables? I mean Master/Slave...


I did this connection:


- to CMD HD mainboard I connected first connector near terminator.
- to HDD I connected next connector
- to CDRW I connected last connector


My friend said that there is no necessary any order, but cable must to have terminator.


I want to be sure, so I'm asking...


Also 2nd Q is:


How will be visible CDRW as second device?


And at end of Qs, if anyone of you have CD-ROM COMMANDER 128, please, let me know, I can also buy!


Many many thanks for every help.


Miro